0° 1/4” HYDROJET THREADED SPRAY NOZZLES

$4.29

Clear
Compare
SKU: N/A Categories: ,

Product Description

MTM Hydro 1/4” HYDROJET THREADED NOZZLES 0° Degree

The 0° is a Cutting nozzle. It delivers a concentrated stream that can gouge or cut. It can cut stubborn stains from concrete and other hard surfaces.

Please see our nozzle chart to select the correct size for your pressure washer:

https://www.rockpowerpumptool.com/nozzle-chart/

 Q: How do I use the chart? The nozzle you need depends on the type of pressure washer you have. The top row of the chart shows “Pounds Per Square Inch””.  Find the PSI of your machine. Then find the amount of “Gallons per Minute (GPM)”your pressure washer uses. The Standard Nozzle Size you need is on the far left of that row.

* Please note that if you use more than 1 nozzle, you need to divide your flow (GPM) by the number of nozzles being used.

  • MT- 17.0208 1/4″ MEG Nozzle, 0°, 2.0 Orifice, $4.29
  • MT- 17.0212 1/4″ MEG Nozzle, 0°, 2.5 Orifice, $4.29
  • MT- 17.0216 1/4″ MEG Nozzle, 0°, 3.0 Orifice, $4.29
  • MT- 17.0220 1/4″ MEG Nozzle, 0°, 3.5 Orifice, $4.29
  • MT- 17.0224 1/4″ MEG Nozzle, 0°, 4.0 Orifice, $4.29
  • MT- 17.0228 1/4″ MEG Nozzle, 0°, 4.5 Orifice, $4.29
  • MT- 17.0232 1/4″ MEG Nozzle, 0°, 5.0 Orifice, $4.29
  • MT- 17.0236 1/4″ MEG Nozzle, 0°, 5.5 Orifice, $4.29
  • MT- 17.0240 1/4″ MEG Nozzle, 0°, 6.0 Orifice, $4.29
  • MT- 17.0244 1/4″ MEG Nozzle, 0°, 6.5 Orifice, $4.29
  • MT- 17.0602 1/4″ MEG Nozzle, 0°, 7.0 Orifice, $4.29
  • MT- 17.0606 1/4″ MEG Nozzle, 0°, 7.5 Orifice, $4.29
  • MT- 17.0610 1/4″ MEG Nozzle, 0°, 8.0 Orifice, $4.29
  • MT- 17.0614 1/4″ MEG Nozzle, 0°, 8.5 Orifice, $4.29
  • MT- 17.0618 1/4″ MEG Nozzle, 0°, 9.0 Orifice, $4.29
  • MT- 17.0622 1/4″ MEG Nozzle, 0°, 9.5 Orifice, $4.29
  • MT- 17.0626 1/4″ MEG Nozzle, 0°, 10.0 Orifice, $4.29

Reviews

There are no reviews yet.

Be the first to review “0° 1/4” HYDROJET THREADED SPRAY NOZZLES”

Your email address will not be published. Required fields are marked *